The error message shown below may appear when you attempt to start a slideshow using one of the procedures under “To start a slideshow from a particular image file” (page 34), “To perform a slideshow by running a presentation file” (page 37), or “To start a slideshow from the currently displayed image file content” (page 38).
There is a problem with the slideshow setup file. Cannot start the slideshow.
If this happens, use
This section explains procedures you can use to play a movie using Viewer.
To play a movie file
1
2
3
On the file menu, select the movie file you want to play.
zFor information about how to select a particular file on the file menu, see “To select a file or a folder” (page 33).
Press the [ENTER] key.
zThis will start playback of the selected movie file.
To stop movie playback and return to the file menu, press the [ESC] key.
Note
Pressing the [ENTER] key while a file whose playback is not supported by the Data Projector is selected will cause the error message “This movie file cannot be played back.” to appear. For more information, see “Supported Playback Data Types” (page 15).
40