7
8
9
After configuring all of the settings you want, click the [Register] button.
zThis will register your settings as a new connection profile and return to the connection profile switching dialog box in step 1.
Click the [Close] button.
zThis closes the connection profile switching dialog box and displays the dialog box shown below.
zWhen the computer finds the Data Projector, the display will change to a dialog box like the one shown below for selecting the connected device.
Check to make sure that “Projector A” is highlighted for the projector name and then click the [OK] button.
zThis will establish a wireless LAN connection between the computer and Data Projector.
zThis will close the connected device selection dialog box and display the Wireless Connection dialog box on the computer screen.
10 On the Wireless Connection window, click the 
button.
zThis will cause the contents of the computer screen to be projected so they fill the entire projection area.
zFor details about Wireless Connection window operations and Data Projector remote controller operations you can perform after establishing a connection, see “Using Wireless LAN for Projection” (page 88).
74