2 Perform the procedure under “To switch the Data Projector connection profile” (page 66) to switch the Data Projector connection profile to “Manual Connection 3”.
zThis will cause the “Standing by for connection...” screen to appear in the projection area. Confirm that the screen shows “Manual Connection 3” for the connection profile.
3
4
5
On the computer that has the 
icon to display the Wireless Connection window.
zThis step is not necessary if the Wireless Connection window is already displayed.
On the Wireless Connection window, select “Switch Connection Profile” on the “Connection” menu.
zThis will display a dialog box for switching the connection profile.
Click the [New] button.
z This will display a dialog box for configuring a new manual connection profile.
6 On the dialog box for configuring the manual connection setup, configure the settings so they are the same as those that you configured for Manual Connection 3 in step 1 of this procedure.
zFor the IP address, use any address that is different from the Data Projector’s address (192.168.10.1). For example, you could use 192.168.10.2.
zFor details about each of the settings on the dialog box, see “Manual Connection Setting Reference” (page 77).
73