To connect the document camera to the Data Projector and project the image of a document

1 Turn on the Data Projector.

z Wait until the Data Projector’s POWER/STANDBY indicator is lit green.

2 Connect the document camera to the Data Projector using the USB cable that comes bundled with the document camera.

YC-400

XJ-S35

Camera

Camera stand

USB cable

3

 

 

Document stage

 

 

With nothing on the document stage, press the [ ] (power) button on the

 

camera stand.

zThis will turn on the document camera, which will cause its lens to extend.

zThe Data Projector will recognize the document camera and start up the YC Camera application automatically. When the YC Camera application starts up, the Data Projector will project an image of the document stage along with a dialog box for adjusting the document camera position.

zIf the document camera is positioned correctly, position adjustment will end automatically and the dialog box will close. At this time the monitor screen (the image being picked up by the document camera) will be projected.

zIf the document camera is not positioned correctly, a message prompting you to adjust the document camera position will appear. Follow the instructions shown in the message to adjust the document camera position.

94