3To use the Manual Connection profile to establish a wireless LAN connection between the first computer and the Data Projector
Note
Perform the following steps while the connection profile dialog box is on the display at the end of the procedure under “2 To create connection profiles for the computers” (page 54).
1 Use the Simple Connection profile to establish a wireless LAN connection between the first computer and the Data Projector.
zSee “Establishing a Wireless LAN Connection with a Single Computer Using a Simple Connection” on page 51 for more information.
zIf a Simple Connection is already established between the first computer and the Data Projector, proceed to step 2.
2 On the Wireless Connection window of the first computer, select “Switch Connection Profile” on the “Connection” menu.
3
4
zThis will display a dialog box for switching the connection profile.
Click the “Profile Name” down arrow button and then select “Manual Connection Test” from the menu that appears.
Click the [Send Settings] button.
z This will display a dialog box for sending the setup.
5 Select “Manual Connection 1” for “Send Destination”, and then click the [OK] button.
zThis will cause the dialog box shown below to appear.
6 Click the [OK] button.
z This will return to the dialog box for switching the connection profile.
56