After you modify the settings of the Data Projector’s manual setting profile, you will also need to modify the existing wireless LAN connection settings (connection profile) of the computer accordingly, or you will have to create a new connection profile. This section explains the procedure for using Wireless Connection to create a new profile or to modify the existing profile of a computer that has a CASIO
Important!
For the required computer wireless LAN connection settings when you are using another manufacturer’s wireless LAN adapter or the computer’s
To create a new computer connection profile
Note
This procedure shows how to create a new computer connection profile to match modifications made in the settings of the Data Projector’s connection profile named “Manual Connection 3”. In this example, the projector’s name (page 68) is “Projector A”.
1 Perform the procedure under “To modify Data Projector manual connection settings” (page 71) to modify Data Projector’s “Manual Connection 3” profile settings as shown below.
Dialog Box Item | Setting |
|
|
Profile Name | MeetingRoomB |
|
|
SSID | ROOM_B |
|
|
Access Mode | Access Point |
|
|
Security Setup | |
|
|
WEP Key Format | ASCII/128bit |
|
|
WPA/WPA2 Encoding | TKIP |
|
|
WEP Key/WPA/WPA2 Pass Phrase | 1234567890abc |
|
|
DHCP | Off |
|
|
IP Address | 192.168.10.1 |
|
|
Subnet Mask | 255.255.255.0 |
|
|
Default Gateway | (To match wireless LAN access point settings.) |
|
|
Channel | Auto |
|
|
zFor details about each of the settings on the dialog box, see “Manual Connection Setting Reference” (page 77).
72