If there are other XJ-S35 Data Projectors with wireless adapters connected in the area, all of them that are detected will appear in the list.
z When the computer finds the Data Projector, the display will change to a dialog box like the one shown below for selecting the connected device.
7
8
9
Click the [Close] button.
zThis will cause the dialog box shown below to appear.
On the Data Projector’s remote controller, press the [ ] key.
zThis will cause the connection profile menu to appear in the projection area.
Use the [T] key to move the highlighting to “Manual Connection 1” and then press the [ENTER] key.
z This will display the dialog box shown below.
10 Presskey. the [S] key to move the highlighting to “Yes” and then press the [ENTER]
zThis will cause the message shown below to appear in the projection area.
Check to make sure that “Manual Connection 1 (Manual Connection Test)” is shown.
11 Check the message that appears on the computer screen.
57