Establishing a Wireless LAN Connection with a Single Computer Using a Simple Connection

To establish a wireless LAN connection between a single computer and the Data Projector

Note

The following explains the simplest type of connection. It shows how to use the Data Projector’s built-in connection profile named “Simple Connection 1” to establish a wireless LAN connection with a single computer.

1

2

Turn on the Data Projector.

zWait until the Data Projector’s POWER/STANDBY indicator is lit green.

Connect the CASIO YW-2 wireless adapter to the Data Projector’s USB port.

zYou could also turn on the Data Projector with the wireless adapter already connected to the USB port.

zThe Data Projector will detect the wireless adapter and start up its Wireless function automatically. The message shown below will appear in the projection area.

Check to make sure that “Simple Connection 1” is shown.

3 Turn on your computer and start up Windows.

4 If your computer is already connected to a wireless network, disable the connection.

zOn the Windows Control Panel, click “Network Connections” (“Network and Dial-up Connection” in the case of Windows 2000). If “Wireless Network Connection” is displayed on the window that appears, right-click the icon and then click “Disable” on the dialog box that appears.

51