Introducing the FaxPress Xerox Interface
•The Xerox WorkCentre Pro or Document Centre must be a model that supports the Xerox Server Fax Kit.
•The FaxPress server must be configured in compliance with the requirements of your local telephone service provider.
•The FaxPress Xerox Interface workstation must be running one of the following operating systems: Windows NT 4.0 Workstation or Server, Windows 2000 Pro or server, Windows 2003 Server, or Windows XP; it must have a Pentium III 500 MHz CPU or faster (or equivalent CPU), 256 MB of RAM and at least 256 MB of free space on its hard drive. The FaxPress Xerox Interface will perform best if this workstation is dedicated, but it will run on any workstation or server that meets the above requirements.
•You must have a local area network (Windows NT or Novell) to which you can connect your FaxPress server, the Windows workstation on which the interface will run, and the Xerox WorkCentre Pro.
See the FaxPress and Xerox Administrator Guides for details.
Note: The requirements listed above are for a minimal FaxPress Xerox Interface; you can connect several Xerox systems to a FaxPress server, and for
Overview of Installation and Configuration Procedures
To set up your FaxPress server and Xerox WorkCentre Pro system for the FaxPress Xerox Interface, complete the following procedures.
1.Connect the FaxPress server hardware and the Xerox WorkCentre Pro system to the same segment of your LAN.
2.Create a Fax Repository for each Xerox system connected to your LAN, placing these repositories on the Windows workstation you plan to use for your FaxPress Xerox Interface (preferably, a dedi- cated PC).
