WARNING: Do not force the camera module into the camera enclosure.
3.Slide the camera module into the camera enclosure. Refer to Figure 6 to position the camera module properly in the camera enclosure. Carefully mate the camera’s power connector to the mating connector located inside the camera enclosure.
Models with a wiper: The tab located inside the camera enclosure must be pointing down before installing the camera module (refer to Figure 6). To position the tab, place the wiper, located at the front of the camera enclosure, in the center of the viewing window (refer to Figure 7).
TAB
CENTER
NOTCHES
CAMERA
MODULE
CAMERA
ENCLOSURE
Figure 6. Install Camera Module
CENTER WIPER
Figure 7. Center Wiper
13 |
