Pelco 2 C1306M-B (10/06) manual Install the Sun Shroud

Models: 2 C1306M-B (10/06) C1306M-B (10/06)

1 24

Page 17

1.Place the supplied nylon washers on the 6-32 Phillips pan head screws. Refer to Figure 12.

2.Align the mounting holes of the sun shroud with the holes on top of the camera enclosure.

3.Use the supplied nylon washers and screws to secure the sun shroud to the camera enclosure.

NYLON

6-32 PHILLIPS PAN WASHER HEAD SCREW

SUN SHROUD

Figure 12. Install the Sun Shroud

C1306M-B (10/06)

Image 17

Contents

I N S T A L L A T I O N C1306M-B10/06ExSite EHXM Series Explosionproof Fixed System List of Tables ContentsList of Illustrations RISK OF ELECTRIC SHOCK DO NOT OPEN Important Safety InstructionsWARNINGS METHODS OF INSTALLATIONGetting Started Install the Power Module Configuration of Wire Harness CONNECT WIRINGPower Connections 24 VAC Power Connections 100-240VACPROTOCOL SETTINGS DIP SWITCH SETTINGSRECEIVER ADDRESS SETTINGS SW1 TERMINATION SETTING SW2Table B. D Protocol Receiver Address Continued on next pageTable A. P Protocol Receiver Address SWITCH SETTING SWITCH SETTINGContinued on next page C1306M-B10/06SWITCH SETTING SWITCH SETTINGContinued on next page C1306M-B10/06SWITCH SETTING SWITCH SETTINGTable B. D Protocol Receiver Address Continued C1306M-B10/06Install the Camera Module Figure 6. Install Camera Module WARNINGS Figure 8. Install Wiper ArmWARNINGS Install the Enclosure and Set Pan PositionSet the Tilt Angle of the Camera Module Install the Sun Shroud CAMERA MODULE REPLACEMENT Maintenance4.Slide the camera module out of the enclosure C1306M-B10/06 WARNINGSELECTRICAL SpecificationsMECHANICAL GENERALCamera CAMERA/OPTICSDay/Night 23X Color LowLight 22X ColorWARRANTY PRODUCT WARRANTY AND RETURN INFORMATIONREVISION HISTORY RETURNSClovis, California 93612 USA USA & Canada Worldwide Headquarters 3500 Pelco WayTel 800/289-9100 Fax 800/289-9150 International Tel 1-559/292-1981 Fax 1-559/348-1120