Install the Camera Module
To install the camera module, do the following:
1. Refer to Figure 4. Loosen the set screw at the back of the camera enclosure with the provided 1.5 mm Allen wrench.
SET SCREW
Figure 4. Loosen Set Screw
WARNING: To avoid thread damage carefully remove the back of the camera enclosure. Never use force to remove the back of the camera enclosure.
2.Use the supplied spanner wrench to loosen the back of the camera enclosure (refer to Figure 5). Once the back is loose, use your hands to continue to loosen it until it can be removed.
CAMERA
ENCLOSURE
BACK
SPANNER
WRENCH
Figure 5. Remove Back Cap of Camera Enclosure
12 |
