How to Adjust each part
1Level Adjustment
•Turn the level adjuster on the rear leg so that the unit is placed stably.
•When the indication line on the level adjuster is at the top, the rear leg is at the same level as the caster of the front leg.
indication line
7 | 8 | |
5 | ||
6 | ||
3 | 4 | |
1 | 2 |
level adjuster
2Adjusting Seat Position
•The seat position can be adjusted while pulling up the seat lock pin. When desired seat position is ob- tained, release the lock pin free and move the seat slightly and the lock pin will click into the nearest hole by spring pressure. Holes are provided at an interval of 3 cm(1- 3/16").
Note: When sliding the seat, take care not to break the pulse sensor cable.
PULL
lock pin
3
SLIDE
3Adjusting Seat Height
•The seat height can be adjusted at your choice.
•Loosen and remove the seat height lock knob, supporting the seat pipe with the other hand.
•Move up or down the seat pipe to the desired height and
seat height lock knob
seat pipe
4Adjusting Pedal Belts
•It is possible to adjust the pedal belt length according to your shoes size.
R
4
Recommended exercise posture
• Adjust the seat position as illustrated. Find the position where your knee is slightly bent when the pedal is at the farthest position.
Remark: When moving the main unit, lift the rear frame holding by the seat height lock knob, and roll the casters.
3
seat height lock knob
2
1
casters
10 | 11 |
