CDA HCG 931 manual Installation, Technical Information for the Installer

11

Installation

Technical Information for the Installer

In order to install the hob into the kitchen fixture, a hole with the dimensions shown in fig. 12 has to be made, bearing in mind the following:

–within the unit, between the bottom of the hob and the upper surface of a shelf there must be a clearance of at least 30 mm.

–It is absolutely essential that you place a separator between the base of the hob and the built-in unit or the oven.

–the hob must be kept no less than 200 mm away from any side wall (fig. 12).

–the hob must be installed at least 60 mm from the wall.

–there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 14).

–if the hob is installed over a built-in oven, there must be a distance of at least 30 mm between the two appliances. The two appliances

should be	connected to the		860
gas supply	with independent	500
connections

	200					min
						60
	min
						0
						2
		840			480	–
			0
			–
			2
	Fig. 12
Installation in Kitchen Cabinet with Door
It is recommended that a 30 mm clearance be left
between the cooktop and the fixture surface (fig. 13).
				450mm	650mm	min
						mm
					60
			200	mm	500	mm
				min
Clearance	mm
	30
Door
Space for
connections	Fig. 13	Fig. 14