ENAMELLED PARTS
All the enamelled parts must be cleaned with a sponge and soapy water only or other
Dry preferably with a soft cloth.
Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the enamel if left too long.
INSIDE OF OVEN
■The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary chemical cleaners may be used after first consulting with the manufacturers recommendations and testing a small sample of the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity surface.
■NOTE: The manufacturers of this appliance will accept no responsibility for dam- age caused by chemical or abrasive cleaning.
■Do not store flammable material in the oven.
STAINLESS STEEL, PAINTED AND ALUMINIUM PARTS
Clean using an appropriate neutral product.
Always dry thoroughly.
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion. You are advised to use a soft cloth and neutral soap.
STAINLESS STEEL SURFACES (CD 308/1 STAINLESS STEEL MODELS)
CAUTION
The STAINLESS STEEL front surfaces used in this oven are protected with a Special Lacquer to reduce
To avoid damaging this lacquer, do not clean the stainless steel with abrasive cleaners or abrasive cloths or scouring pads.
ONLY SOAP/WARM WATER MUST BE USED TO CLEAN THE STAINLESS STEEL SURFACES.
23
