ASSEMBLY STEP 2

For Sectional and

One-Piece Doors OnlyInstall the Trolley

•

Attach the trolley threaded shaft to the trolley with

 

the lock washer and nuts as shown.

•

As a temporary stop, insert a screwdriver into the

 

hole in the front end of the T-rail.

Lock Washer 5/16"

HARDWARE SHOWN ACTUAL SIZE

Lock Washer

Nut

5/16"

5/16"-18

Inner Nut 5/16"

• Slide the trolley assembly along the rail to the

screwdriver stop.

NOTE: If trolley hits against any nuts on the T-rail, the bolts and nuts were attached from the wrong side and must be repositioned. Review Assembly Step 1.

Temporary Stop

Screwdriver

Trolley

Outer Nut

Trolley

Threaded

5/16"

Shaft

ASSEMBLY STEP 2

For Sliding and

Swinging Gates Only

Install the Trolley

•Attach the trolley threaded shaft to the trolley with the lock washer and nuts as shown.

•Insert a hex bolt into the hole in the front end of the T-rail.

•Slide the trolley assembly along the rail until it rests against the hex bolt (trolley stop).

NOTE: If trolley hits against any nuts on the T-rail, the bolts and nuts were attached from the wrong side and must be repositioned. Review Assembly Step 1.

Hex Bolt 5/16"-18x7/8"

Hex Bolt Trolley Stop

Lock Washer 5/16"

Nut 5/16"-18

HARDWARE SHOWN ACTUAL SIZE

Hex Bolt

Nut

Lockwasher

5/16"-18x7/8"

5/16"-18

5/16"

Inner Nut

 

 

5/16"

Trolley

 

Outer Nut

Threaded

 

Shaft

 

5/16"

 

 

 

 

Lock Washer

 

 

5/16"

 

 

 

Chain Pulley

 

 

Bracket

11