To Add, Reprogram or Change a Keyless Entry PIN

NOTE: Your new Keyless Entry must be programmed to operate your garage door opener.

USING THE LIGHTED DOOR CONTROL

USING THE MULTI-FUNCTION DOOR CONTROL

NOTE: These methods requires two people if the Keyless Entry is already mounted outside the garage.

1. Remove the cover from the Lighted Door Control.

2. Enter a four digit personal identification number (PIN) of your choice on the keypad. Then press and hold ENTER.

1.

Enter a four digit personal

 

identification number (PIN) of your

 

choice on the keypad. Then press

 

and hold ENTER.

2.

While holding the ENTER button,

 

press and hold the LIGHT button

 

on the Multi-Function Door

 

Control.

3.While holding the ENTER button, press and hold the “A” button on the Lighted Door Control.

4.Continue holding the ENTER and “A” buttons while you press the “B” button on the Lighted Door Control (all three buttons are held).

5.Release buttons when the motor unit lights blink. It has learned the code. If light bulbs are not installed, two clicks will be heard.

"A"

Button

"B" Button

3.

Continue holding the ENTER and

 

LIGHT buttons while you press

 

the push bar on the Multi-Function

 

Door Control (all three buttons are

 

held).

4.

Release buttons when the motor

 

unit lights blink. It has learned the

 

code. If light bulbs are not

 

installed, two clicks will be heard.

LOCK

LIGHT

LOCK

LIGHT

To change an existing, known PIN

If the existing PIN is known, it may be changed by one person without using a ladder.

1.Press the four buttons for the present PIN, then press and hold the # button.

The opener light will blink twice. Release the # button.

2.Press the new 4-digit PIN you have chosen, then press ENTER.

The motor unit lights will blink once when the PIN has been learned.

Test by pressing the new PIN, then press ENTER. The door should move.

To set a temporary PIN

You may authorize access by visitors or service people with a temporary 4-digit PIN. After a programmed number of hours or number of accesses, this temporary PIN expires and will no longer open the door. It can be used to close the door even after it has expired. To set a temporary PIN:

1.Press the four buttons for your personal entry PIN (not the last temporary PIN), then press and hold the ✽ button.

The opener light will blink three times. Release the button.

2.Press the temporary 4-digit PIN you have chosen, then press ENTER.

The opener light will blink four times.

3.To set the number of hours this temporary PIN will work, press the number of hours (up to 255), then

press ✽.

OR

3.To set the number of times this temporary PIN will work, press the number of times (up to 255), then press #.

The opener light will blink once when the temporary PIN has been learned.

Test by pressing the four buttons for the temporary PIN, then press ENTER. The door should move. If the temporary PIN was set to a certain number of openings, remember that the test has used up one opening.To clear the temporary password, repeat steps 1-3, setting the number of hours or times to 0 in step 3.

37