Chamberlain 1210E FS2, 1220E FS2 Door Control, Lock feature, Light feature, CONTROL (MODEL 1220E), Using the Wall-Mounted, THE MULTI-FUNCTIONDOOR, To Open the Door Manually

Using the Wall-MountedDoor ControlTHE LIGHTED DOOR CONTROL BUTTON (MODEL 1210E)

Press the button to open or close the door. Press again to reverse the door during the closing cycle or to stop the door while it's opening.

THE MULTI-FUNCTION DOORCONTROL (MODEL 1220E)

Press the push bar to open or close	Push
	Bar
the door. Press again to reverse the
door during the closing cycle or to	Lock
stop the door while it's opening.	Button
	Light
LOCK
LIGHT
Light feature	Button

To Open the Door Manually

WARNING

To prevent possible SERIOUS INJURY or DEATH from a falling garage door:

•If possible, use emergency release handle to disengage trolley ONLY when garage door is CLOSED. Weak or broken springs or unbalanced door could result in an open door falling rapidly and/or unexpectedly.

•NEVER use emergency release handle unless garage doorway is clear of persons and obstructions.

•NEVER use handle to pull door open or closed. If rope knot becomes untied, you could fall.

Press the Light button to turn the opener light on or off. It will not control the opener lights when the door is in motion. If you turn it on and then activate the opener, the light will remain on for 4-1/2 minutes. Press again to turn it off sooner.

Lock feature

Designed to prevent operation of the door from hand-held remote controls. However, the door will

The door should be fully closed if possible. Pull down on the emergency release handle and lift the door manually. To reconnect the door to the opener, press the door control button.

	Trolley
Emergency	Release
	Arm
Release
Handle	N
	OT
(Pull Down)	ICE

MANUAL DISCONNECT

POSITION

open and close from the Door Control, the Outside Keylock and the Keyless Entry Accessories.

To activate, press and hold the Lock button for 2 seconds. The push bar light will flash as long as the Lock feature is on.

To turn off, press and hold the Lock button again for 2 seconds.The push bar light will stop flashing. The Lock feature will also turn off whenever the “Learn” button on the motor unit panel is activated.

The lockout feature prevents the trolley from reconnecting automatically, Pull the emergency release handle down and back (toward the opener). The door can then be raised and lowered manually as often as necessary. To disengage the lockout feature, pull the handle straight down. The trolley will reconnect on the next UP or DOWN operation.

Trolley

Release

Arm

Emergency
Release Handle
(Pull Down & Back
Towards Opener)	TICE
	NO

LOCKOUT POSITION

33