Chamberlain 182665D To Add, Reprogram or Change a Keyless Entry PIN, NOTE:, One Button Close:, To set a temporary PIN, To change an existing, known PIN

USING THE “LEARN” BUTTON

To Add, Reprogram or Change a Keyless Entry PIN

NOTE: Your new Keyless Entry must be programmed to operate your garage door opener.

USING THE MULTI-FUNCTION DOOR CONTROL

1. Press and release the “learn”	NOTE: This method requires two people if the Keyless
1. Press and release the “learn”	Entry is already mounted outside the garage.
button on motor unit. The learn	Entry is already mounted outside the garage.
button on motor unit. The learn	1. Enter a four digit personal
indicator light will glow steadily	1. Enter a four digit personal
for 30 seconds.		identiﬁcation number (PIN)
		of your choice on the keypad.
2. Within 30 seconds, enter a four		Then press and hold ENTER.
2. Within 30 seconds, enter a four
digit personal identiﬁcation	2. While holding the ENTER
number (PIN) of your choice	2. While holding the ENTER
on the keypad. Then press and		button, press and hold
hold the ENTER button.		the LIGHT button on the
		Multi-Function Door Control.
3. Release the button when the	3. Continue holding the ENTER
motor unit lights blink. It has	3. Continue holding the ENTER
learned the code. If light bulbs		and LIGHT buttons while you
are not installed, two clicks will		press the push bar on the
be heard.		Multi-Function Door Control
		(all three buttons are held).
To change an existing, known PIN
If the existing PIN is known, it may be changed by one	4. Release buttons when the
person without using a ladder.		motor unit lights blink. It has
1. Press the four buttons for the present PIN, then press		learned the code. If light bulbs
1. Press the four buttons for the present PIN, then press		are not installed, two clicks will
and hold the # button.		are not installed, two clicks will
and hold the # button.		be heard.
The opener light will blink twice. Release the # button.		be heard.
The opener light will blink twice. Release the # button.
2. Press the new 4-digit PIN you have chosen, then	2. Press the temporary 4-digit PIN you have chosen, then
press ENTER.		press ENTER.
The motor unit lights will blink once when the PIN has		The opener light will blink four times.
been learned.	3.	To set the number of hours this temporary PIN will
Test by pressing the new PIN, then press ENTER. The door		work, press the number of hours (up to 255), then
should move.		press ✽.
To set a temporary PIN		OR
You may authorize access by visitors or service people	3.	To set the number of times this temporary PIN will
with a temporary 4-digit PIN. After a programmed number		work, press the number of times (up to 255), then
of hours or number of accesses, this temporary PIN		press #.
expires and will no longer open the door. It can be used	The opener light will blink once when the temporary PIN
to close the door even after it has expired. To set a	has been learned.
temporary PIN:	Test by pressing the four buttons for the temporary
1. Press the four buttons for your personal entry PIN	Test by pressing the four buttons for the temporary
1. Press the four buttons for your personal entry PIN	PIN, then press ENTER. The door should move. If the
(not the last temporary PIN), then press and hold the	temporary PIN was set to a certain number of openings,
✽ button.	remember that the test has used up one opening. To clear
The opener light will blink three times. Release the	the temporary password, repeat steps 1-3, setting the
button.	number of hours or times to 0 in step 3.

One Button Close: Opener can be closed by pressing only the ENTER button if the one button close feature has been activated. This feature has been activated at the factory. To activate or deactivate this feature press and hold buttons 1 and 9 for 10 seconds. The keypad will blink twice when the one button close is active. The keypad will blink four times when one button close is deactivated.