The Post Office requires installation of a postal lock if postal carriers do not have access to a controlled area. Contact the local post office and arrange for them to install the postal lock while you are on site. The postal lock requires a switch to activate one of the four relays (Configurable with programming number 69 , in the Keypad Programming Manual).
J7
Wiring
In
J6 | POSTAL | J3 | Common |
|
Use
AUTO | J2 |
J5 |
|
J1 POWER 12VAC/DC
J4
IO Input Board
Input Board
(See page 6)
N.C.
Switch
DO NOT overload the removable terminal block connectors. One wire per hole.
NOTE: In the EL2000 models, the postal lock switch is
An Optional CCTV (Close Circuit Television) camera can be installed inside the unit. Refer to instructions supplied with the camera kit for more information.
Contact your dealer/ installer for more information
Home Entertainment
System
OR
(Monitor with a .25 volt
EL25 | EL2000 |
A Closed Circuit Monitor
Page 19