EL25 Installation
Caution! A Static Discharge can Damage Circuit Boards
NOTE: This unit is for surface mount applications only.
1 Unlock Unit | 2 Carefully Lift Cover Up | 3 Unplug the 2 Main Harnesses |
| then Slide Out on Hinges |
|
5 Remove Back Mounting Plate from Cover 4 Line up Notch with
Screw and Push
Hinge Out
Screw
Notch
DO NOT pinch wires when | DO NOT overload the removable |
terminal block connectors. | |
closing and locking the unit. | One wire per hole. |
Rotating the Keypad for Vertical Mounting
Caution! A Static Discharge can | For EL25 ONLY |
| |||
Damage Circuit Boards |
|
|
|
| |
1 | Disconnect all Plugs from Main Circuit Board and |
| |||
| Remove Board. (4 Screws) |
|
|
|
|
2 | Remove Bracket. (4 Screws) |
|
|
|
|
3 | Rotate Keypad 90 Degrees Clockwise. | 3 Keypad |
|
|
|
|
| ||||
|
|
|
|
|
|
4 Reverse the Sequence to Reassemble Unit.
ONLY Vertical | 2 Bracket |
1 Main Circuit | |
Mounting Position | Board |
|
NOTE: Bracket notch lines up with ribbon cable on keypad.
Main Circuit Board Connections
J200 | - Speaker | J401 | - Keypad |
J402 | - Light | J406 | - Light |
J404 | - Call Button Board | J201 | - Microphone |
Installation EL25
Page 3