Installation

8 Install the door bracket

OPTIONB ONE-PIECE DOORS

8.1B Center the door bracket on the top of the door, in line with the header bracket as shown.

8.2B Mark either the left and right, or the top and bottom holes.

Metal Doors:

•Drill 3/16" pilot holes and fasten the bracket with the self-threading screws (H16) provided.

Wood Doors:

•Drill 5/16" holes and use 5/16"x2" carriage bolts, lock washers and nuts (not provided) or 5/16"x1-1/2" lag screws (not provided) depending on your installation needs.

NOTE: The door bracket may be installed on the top edge of the door if required for your installation. (Refer to the dotted line optional placement drawing.)

(Finished Ceiling)

Header Wall

2x4 Support

Header Bracket

Door Bracket

Optional

Placement

of Door

Bracket

Vertical

Centerline

of Garage

Door

For a door with no exposed framing, or for the optional installation, use lag screws 5/16"x1-1/2" (not provided) to fasten the door bracket.

Metal Door

H16

Door

Top of Door

(Inside Garage)

Bracket

 

 

Top Edge of

 

Door

 

Optional

 

Placement

Wood Door

Nut 5/16"-18

 

Lock Washer 5/16"

Door

 

Bracket

Top of Door

(Inside Garage)

 

 

Top Edge

 

of Door

 

Optional

 

Placement

 

Carriage Bolt 5/16"x2"

 

(not provided)

18