Assembly

2 Fasten the rail to the garage door opener

To avoid SERIOUS damage to garage door opener, use ONLY those bolts/fasteners mounted in the top of the opener.

HARDWARE

H2

Bolt 1/4"-20x1-3/4"

H4

(Mounted in the

Lock Nut 1/4"-20

garage door opener)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: ONLY use the bolts removed from the garage door opener. Place the garage door opener on the packing material to prevent scratching.

2.1Insert the bolt (H2) into the hole on the back end of the rail as shown. Tighten securely with the lock nut (H4). Do not overtighten.

2.2Remove the two bolts from the top of the garage door opener.

2.3Place the “U” bracket, flat side down onto the garage door opener and align the bracket hole with the bolt holes. Fasten the “U” bracket with the previously removed bolts.

2.4Prop up the end of the rail on the carton to help align it with the “U” bracket.

2.5Slide the rail onto the “U” bracket, until it reaches all the stops on the top and sides of the “U” bracket.

Bolts

“U” Bracket

H2

Cover

Protection

Bolt Hole

SLIDE RAIL TO

STOPS ON TOP AND

H4SIDES

Carton

7