Remote Control

Your remote control has been programmed at the factory to operate with your garage door opener.

Older Chamberlain remote controls are NOT compatible, see page 47 for compatible accessories. Programming can be done through the door control or the learn button the garage door opener. To program additional accessories refer to the instructions provided with the accessory or visit www.chamberlain.com. If your vehicle is equipped with a Homelink®, you may require an external adapter depending on the make, model, and year of your vehicle. Visit www.homelink.com for additional information.

TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE MOTION-DETECTING CONTROL PANEL

1Press the LEARN button on the door control to enter

Programming Mode.

The command LED will flash once.

2Press the LEARN button again, the LED will flash

once.

The command LED will flash once again.

3Remote Control:

Press the button on the remote control that you wish to operate your garage door.

Keyless Entry:

Enter a 4-digit personal identification number (PIN) of your choice on the keyless entry keypad. Then press the ENTER button.

The garage door opener lights will flash (or two clicks will be heard) when the code has been programmed. Repeat the steps for programming additional remote controls or keyless entry devices.

OR

 

 

 

1

2

3

 

4

5

6

 

 

 

#

7

8

9

*

 

0 QZ

*

0

 

#

 

 

 

 

 

 

ENTER

 

? ? ? ?

PIN

TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE SMART CONTROL PANEL

1Press the navigation button below "MENU" to view the Features menu.

2Use the navigation buttons to scroll to "PROGRAM".

PRESS TO CONTINUE.

3Select "REMOTE" or "KEYPAD" to program from the program menu.

Press to continue.

TO REMOTE

4Remote Control:

Press the button on the remote control that you wish to operate your garage door.

Keyless Entry:

Enter a 4-digit personal identification number (PIN) of your choice on the keyless entry keypad. Then press the ENTER button.

The garage door opener lights will flash (or two clicks will be heard) when the code has been programmed.

Repeat the steps for programming additional remote controls or keyless entry devices. If programming is unsuccessful, program the remote using the learn button.

OR

*

 

0 QZ

#

 

ENTER

 

? ? ? ?

PIN

39