Char-Broil 463269411 Assembly Of Right Cart, Front, Locking caster Fixed caster, Bottom shelf

ASSEMBLY OF RIGHT CART

1

Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.

Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front. After all 4 casters are secure remove the Bent U Pin and save for future maintenance.

Locking caster

Fixed caster

Front

Bottom shelf

A

Bent U pin

2

Attach drawer front bracket-L to left side panel using two #10-24x3/8”screws, 5mm lock washers per panel.

Only drawer front bracket-L shown for assmebly, install drawer front bracket-R in the same way.

IMPORTANT: Drawer front bracket-L with hole underneath must be on left side panel.

Drawer front bracket-L	#10-24x3/8” screw
(with hole)

5mm lock washer

Left side panel

20