Char-Broil 463269411 manual emitters must be placed, keeping both flat walls, flare-up

12

Install heat diffuser by sliding one end of each heat diffuser into slots at front of firebox and resting opposite end on pins in back of firebox.

Note: Some parts omitted forHeat diffuser clarity of illustration

Front of firebox

Back of firebox

13

Place stainless steel emitters onto the firebox, shown A. Place cooking grates onto stainless steel emitters, shown B. Insert the two wire ends at rear of warming rack into holes in back of firebox. Front wires of warming rack rest on sides of firebox, shown C.

A

Note: Some parts omitted for clarity of illustration

Stainless steel emitter

Assembled warming rack

B

IMPORTANT: Stainless steel
emitters must be placed		Cooking grate
keeping both flat walls
overlapped to prevent any
flare-up.
	C	Warming rack

30