Char-Broil 463269411 manual self-tapping screw, Front brace

8

A

Inside of cart, insert rear shield tabs into slots next to grease tray opening on upper back panel, shown A. Attach front shield tabs(with holes) under front brace with two #8x3/8” self-tapping screws, shown B.

Note: some parts omitted for clarity of illustration

Tank heat shield

Upper back panel Front Brace

Cart lower back panel

Grease tray opening

#8x3/8”

self-tapping screw

B

9

Insert cart partition panel under control panel between side panels, shown A.

Attach cart partition panel to bottom shelf using two 1/4-20x1/2”screws and 7mm lock washers, shown B. Attach cart partition panel to lower back panel using two #8x3/8” self-tapping screws, shown C.

Attach cart partition panel to front brace using one #8x3/8” self-tapping screw, shown D.

Cart partition	A	B
panel
		1/4-20x1/2”
		screw
		7mm lock washer
C

#8x3/8”	D
self-tapping screw

Cart partition panel

Front

brace

#8x3/8” self-tapping screw

28