Chevrolet 2008 owner manual Taillamps, Turn Signal, and Stoplamps

Taillamps, Turn Signal, and Stoplamps

A.Backup Lamp

B.Turn Signal Lamp

C.Stoplamp/Taillamp

If you have an uplevel vehicle, see your dealer/retailer.

1.Open the trunk. See Trunk on page 2-13for more information.

2.Remove the convenience net, if the vehicle has one.

3.Remove the convenience net hooks holding the trunk trim.

4.Remove the three wing nuts, which hold the taillamp assembly, from inside the vehicle.

5.Remove the taillamp assembly.

6.Remove the wiring harness from the taillamp assembly by lifting the release tab.

7.Turn the bulb socket counterclockwise to remove it.

8.Pull the bulb from the socket.

9.Install a new bulb.

10.Reverse Steps 2 through 6 to reinstall the taillamp assembly.

5-49