Chevrolet 2008 owner manual Outside Power Mirrors

To adjust for compass variance, do the following:

1.Find your current location and variance zone number on the zone map that follows.

2.Press and hold the on/off button until a zone number appears on the display.

3.Once the zone number appears on the display, press the on/off button quickly until you reach the correct zone number. If C appears in the compass window, the compass may need calibration. See “Compass Calibration” listed previously.

Outside Power Mirrors

The controls for the outside power mirrors are located on the inside of the vehicle near the driver’s side mirror.

Use the selector switch located above the four-way control panel to choose either the left or right outside mirror. Then press the control pad to move the selected mirror in the desired direction.

To maximize the viewing area, adjust each mirror so you can see the side of your vehicle and the area beside and behind your vehicle.

2-41