Chevrolet 2008 owner manual Shifting Into Park

The PUSH PARK PEDAL message will also display in the Driver Information Center (DIC) as a reminder

to release the parking brake. See DIC Warnings and Messages on page 3-48.

Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving.

If you are towing a trailer and are parking on a hill, see Towing a Trailer on page 4-30.

Shifting Into Park

{CAUTION:

It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine running, the vehicle

CAUTION: (Continued)

CAUTION: (Continued)

can move suddenly. You or others could be injured. To be sure the vehicle will not move,even when you are on fairly level ground, use the steps that follow. If you are pulling a trailer, see Towing a Trailer on page 4-30.

1.Hold the brake pedal down with your right foot and set the parking brake. See Parking Brake on page 2-34for more information.

2.Move the shift lever into PARK (P) by holding in the button on the shift lever and pushing the shift lever all the way toward the front of the vehicle.

3.Turn the ignition key to LOCK/OFF.

4.Remove the key and take it with you. If you can leave your vehicle with the ignition key in your hand, your vehicle is in PARK (P).

2-35