VIDEO INPUT
SELECTING INPUT SOURCE
The following description are based on the premise that 5 BNC INPUT JACKS board (Optional) or AV TERMINAL board (Optional) is inserted into INPUT 2 or INPUT 3 respectively.
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from video equipment to R/Pr, G/Y and B/Pb jacks.
1 | Press MENU button and |
POINT LEFT/RIGHT button to move a red frame pointer to | |
| INPUT Menu icon. |
2 | Press POINT DOWN button to move a red arrow pointer to Input |
2 and then press SELECT button. Source Select Menu will | |
| appear. |
3 | Press POINT DOWN button and a |
Move arrow to "Y, Pb/Cb, Pr/Cr" and then press SELECT button. |
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to Input 2 and press SELECT button.
Input 2
Source Select Menu
Move a pointer to
Y, Pb/Cb, Pr/Cr and press
SELECT button.
WHEN SELECT INPUT 3 (AV TERMINAL )
When connecting to those equipment, select a type of Video source in SOURCE SELECT (VIDEO) Menu.
1 | Press MENU button and | |
POINT LEFT/RIGHT button to move a red frame pointer to | ||
| INPUT Menu icon. | |
2 | Press POINT DOWN button to move a red arrow pointer to Input | |
3 and then press SELECT button. Source Select Menu will | ||
| appear. | |
3 | Move a pointer to source that you want to select and then press | |
SELECT button. | ||
|
| When video input signal is connected to VIDEO jack, |
| Video | |
|
| select Video. |
|
| |
| When video input signal is connected to | |
|
| select |
|
| |
|
| When video input signal is connected to VIDEO/Y, C |
| Y, C | |
|
| jacks, select Y, C. |
|
| |
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to Input 3 and press SELECT button.
Input 3
Source Select Menu (VIDEO)
Move a pointer to source and press SELECT button.
28
