Step 9 Enter the IP address 10.0.0.1 and press Enter.

The Express Setup home page appears.

Step 10 Go to “Completing the Express Setup Fields” section on page 17 to finish setting up the switch module using the Express Setup screen of the Device Manager.

Using the Onboard Administrator to Assign an IP Address to the Switch Module fa0 Interface

For the switch module to obtain an IP address for the fa0 interface through the Onboard Administrator, these conditions must be met:

The blade server is powered on and connected to the network.

Basic configuration of the Onboard Administrator is completed, and you have the username and password for the Onboard Administrator.

A DHCP server is configured on the network segment to which the blade server is connected, or the Onboard Administrator is configured to run as a DHCP server.

14

Page 14
Image 14
Cisco Systems 3020 warranty