Cisco Systems 3020 warranty Cisco Gigabit Ethernet Switch Module Description

If the switch modules are ordered with the blade server, the switch modules are already installed. The unpacking procedure for the switch module applies only if one is ordered separately. See the blade server documentation for the unpacking procedure for the HP equipment.

Cisco Gigabit Ethernet Switch Module Description

The Cisco Catalyst Blade Switch 3020 for HP is a 24 Gigabit Ethernet port, Layer 2+ switch module. Sixteen of the Gigabit Ethernet ports are internal 1000BASE-X downlink ports that connect to the blade server. The other eight Gigabit Ethernet ports are external uplink ports that provide connections to other switches or routers. Uplink ports operate at 10/100/1000 Mbps if used as RJ-45 ports and operate at 1000 Mbps if small form-factor pluggable (SFP) fiber-optic modules are installed. See Table 1 for more detailed descriptions of the switch module ports.

Figure 1 shows the switch module.

Figure 1 The Catalyst Blade Switch 3020 for HP

2

1

SYST
STAT
DLX
SPD
WS-
CBS-
	3020-
		HPQ

4 5

3

6	9	10		11
	17
	SFP/R-		17x
	20
	17
	18
	19	20x	24x
	20
			18x

7 8

23x

24x

153139

1		Switch module	7	Health LED
2		Release latch	8	SFP module port LEDs for ports 17 to 20
3		System status LEDs	9	SFP module ports 17 to 20
4		Mode button	10	Gigabit Ethernet ports LEDs for ports 17x to 24x
5		Console port	11	Gigabit Ethernet ports 17x to 24x
6		UID1 LED
1.	UID: unit identifier

The switch module is managed through the RS-232 console port that uses an RJ-45 connector in the switch module front-panel.

3