Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems 3020 warranty Managing the Switch Module, Refreshing the PC IP Address

Models: 3020

1 36

Download 36 pages 51.89 Kb

Page 19

Refreshing the PC IP Address

After you complete Express Setup, you should refresh the PC IP address:

•For a dynamically assigned IP address, disconnect the PC from the switch module, and reconnect the PC to the network. The network DHCP server assigns a new IP address to the PC.

•For a statically assigned IP address, change it to the previously configured IP address.

6Managing the Switch Module

After you complete Express Setup and install the switch module in your network, use the device manager or other management options described in this section for further configuration.

Using the Device Manager

The simplest way to manage the switch module is by using the device manager that is in the switch module memory. This is a web interface that offers quick configuration and monitoring. You can access the device manager from anywhere in your network through a web browser.

Follow these steps:

1.Launch a web browser on your PC or workstation.

2.Enter the switch module IP address in the web browser, and press Enter. The device manager page appears.

19

Image 19

Cisco Systems 3020 warranty Managing the Switch Module, Refreshing the PC IP Address, Using the Device Manager

Contents

INCLUDING LICENSE AND WARRANTY Cisco Catalyst Blade Switch 3020 for HP Getting Started GuideGetting Started Guide 2 Taking Out What You Need 1 IntroductionCisco Gigabit Ethernet Switch Module Description Description PortCisco Catalyst Blade Switch 3020 for HP Port Descriptions Figure 2 Rear View of the Blade Server 3 HP c-Class BladeSystem Architecturethis equipment. Statement 4 Installing the Switch Module in the Blade ServerFollow these steps to install the switch module in the blade server Step 5 Slide the switch module into the bay until it stops. See Figure Switch Module IP Addresses 5 Running Express SetupInformation You Need to Run Express Setup To prepare the switch module 1 Mode button Caution Do not connect the switch module to any device other than the PC or workstation being used to configure it Step 9 Enter the IP address 10.0.0.1 and press Enter Page Page Completing the Express Setup Fields Page Using the Device Manager 6 Managing the Switch ModuleRefreshing the PC IP Address Command-Line Interface 7 In Case of Difficulty Onboard Administrator Command-Line InterfaceOther Management Options Troubleshooting Express Setup Accessing Help Online Resetting the Switch Module2. Click Technical Support and Documentation For More Information3. Click Tools and Resources Ordering Documentation 8 Obtaining DocumentationCisco.com Product Documentation DVD10 Cisco Product Security Overview 9 Documentation FeedbackReporting Security Problems in Cisco Products 11 Obtaining Technical Assistance Submitting a Service RequestCisco Technical Support & Documentation Website 12 Obtaining Additional Publications and Information Definitions of Service Request SeverityPage Cisco 90-Day Limited Hardware Warranty Terms 13 Hardware Warranty TermsTo Receive a Return Materials Authorization RMA Number HP Hardware Warranty TermsDuration of Hardware Warranty Replacement, Repair, or Refund Policy for HardwareCity Company NameName Address No P.O. BoxesPage Page Asia Paciﬁc Headquarters Corporate HeadquartersEuropean Headquarters Americas Headquarters