Cisco Systems 3545 Serial Connecting the Gateway to the Network, 2-15, Related Topics, Procedure

Models: 3545 Serial 3545 PRI

1 76
Download 76 pages 29.66 Kb
Page 35
Image 35
•Chapter 3, “Using the Cisco Software Upgrade Utility”

Chapter 2 Installing the Cisco Unified Videoconferencing 3545 Gateway

Connecting the Gateway to the Network

This is a global login name that the upload, upgrade, and Telnet utilities use to log in to the gateway software. It can also be used to access the Administrator interface. The default user name is admin.

Step 6 In the Password field, type the software password.

The default value is null.

Note To view the software components that will upgrade, click Customize. The Customize dialog box appears. If you do not want to upgrade a component, deselect it.

Step 7 Click Upgrade.

The upgrade process takes a few minutes. After the upload completes, the Upload Complete Message dialog box appears.

Step 8 Click OK.

Related Topics

Chapter 3, “Using the Cisco Software Upgrade Utility”

Connecting the Gateway to the Network

The Cisco Unified Videoconferencing 3545 Gateway can connect to the LAN only through the front panel. The gateway supports a 10/100BaseT, full-duplex Ethernet interface through an RJ-45 connector.

Procedure

Step 1 Connect the supplied LAN cable from your network hub to the 10/100BaseT Ethernet port on the front panel of the gateway. The 10/100BaseT port accepts an RJ-45 connector.

Step 2 Connect a separate ISDN or serial line to each PRI or serial port in the rear panel of the gateway. The port accepts an RJ-45 connector.

Connecting PRI Lines to the Gateway

You must connect a PRI line to at least one Cisco Unified Videoconferencing 3545 PRI Gateway port. The gateway supports T1 and E1 PRI configurations.

Connecting Serial Lines to the Gateway

You can connect the Cisco Unified Videoconferencing 3545 Serial Gateway to four serial lines that may support different physical standards (V.35, RS-449 or EIA-530). The system is capable of recognizing the type of cable connected.

 

 

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 PRI Gateway and 3545 Serial Gateway Release 5.6

 

 

 

 

 

 

OL-17011-01

 

 

2-15

 

 

 

 

 

Page 35
Image 35
Cisco Systems 3545 Serial Connecting the Gateway to the Network, Connecting PRI Lines to the Gateway, 2-15, Related Topics