Chapter 2 Installing the Cisco Unified Videoconferencing 3545 Gateway
How to Perform the Initial Gateway Configuration
Step 6 Press Enter.
The network configuration Main menu appears.
Step 7 At the Network Configuration menu, do one of the following:
•Enter the letter for the set of parameters that you want to configure.
•Enter Q to save your changes and allow the device to complete the boot process.
Changing the Configuration Tool Login Password
You can use the terminal emulator to change the default password of the default login user before others can use the gateway interface.
Procedure
Step 1 Start a terminal emulator session for the gateway.
Step 2 Press the RST button on the front panel of the gateway.
After 60 seconds, a new terminal emulator session begins on the computer monitor.
After the second VxWorks banner scrolls across the screen, the following message appears: “Press any Key to start the configuration.”
Step 3 Press any key and then press Enter.
Step 4 At the prompt, enter P and press Enter to select “change the configuration software password.” Step 5 Type the user login name for which you want to change the password and press Enter.
The default user name is admin. This is the user name that allows you to access the gateway interface. Step 6 Type the password you want the user to use to log in to the gateway interface and press Enter.
There is no default password.
Step 7 The network configuration Main menu
Step 8 Enter Q and press Enter to exit.
Upgrading Gateway Software
|
|
|
| Software upgrades for the gateway include the software components that are upgraded for the new | |
|
|
|
| version and a utility to upload the software to the unit. | |
|
|
|
| Procedure | |
|
|
|
|
| |
|
|
| Step 1 | Download the upgrade software to a host that can access the gateway. | |
|
|
| Step 2 | Unzip the upgrade file. | |
|
|
| Step 3 | Double click the upgrade.exe file. | |
|
|
| Step 4 | In the Target IP field, type the IP address of the gateway for which you want to upload the software. | |
|
|
| Step 5 | In the User Name field, type the software user name. | |
|
|
| Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 PRI Gateway and 3545 Serial Gateway Release 5.6 | ||
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| ||
