Cisco Systems 4000 specifications 1-28, WS-U4504-FX-MT Uplink Module, Specification, Description

Chapter 1 Module Overview and Specifications

Ethernet and Fast Ethernet Switching Modules

WS-U4504-FX-MT Uplink Module

The WS-U4504-FX-MT uplink module (see Figure 1-26) has the following specifications:

Specification	Description
Module type	100BASE-FX uplink module
Port duplex mode	Half or full duplex mode
Port speed	100 Mbps
Number of ports	4
Connector type	MT-RJ (See Figure 2-4 on page 2-4.)
Cable type	MMF cable

Figure 1-26 WS-U4504-FX-MT Uplink Module

WS-U4504-FX-MT

N+1 N+2 N+3 N+4

23837

The WS-U4504-FX-MT uplink module is installed onto a switching module to provide optional port configurations.

Each port has a port link status LED below it, which is labeled N+x. The N indicates the last number of the port that is used on the Ethernet switching module (WS-X4232-RJ-XX).

For the far left port on the WS-U4504-FX-MT uplink module, add 1 to that number; for the second port, add 2; for the third port, add 3; for the last port, add 4.

	Catalyst 4500 Series Module Installation Guide
1-28	78-13267-06