Cisco Systems 4000 Switching Module LEDs, Access Gateway Module WS-X4604-GWY, 1-43, Specification

Chapter 1 Module Overview and Specifications

Switching Module LEDs

Specification	Description
Connector type	–
Cable type	–

Figure 1-39 WS-X4019 Backplane Channel Module

38301

Note The backplane channel module is supported by only the WS-X4013 supervisor engine in the Catalyst 4006, 4503, or 4506 switches using the Catalyst Operating System.

Access Gateway Module (WS-X4604-GWY)

The Access Gateway Module is described in the Catalyst 4000 Access Gateway Module Installation and Configuration Note (DOC-7810818).

Switching Module LEDs

Each switching module has one LED labeled STATUS that provides information about the module and one numbered LED labeled LINK for each port on the module. Figure 1-40shows the Gigabit Ethernet port and status LEDs.

Figure 1-41shows the 10/100BASE-T port LEDs. Table 1-3describes the switching module LEDs.

	Catalyst 4500 Series Module Installation Guide
78-13267-06		1-43