Chapter 1 Module Overview and Specifications
Gigabit Ethernet Switching Modules
WS-X4524-GB-RJ45V
The WS-X4524-GB-RJ45V 24-port IEEE 802.3af-compliant PoE 10/100/1000BASE-T RJ-45 switching module (see Figure 1-35) has the following specifications:
Specification | Description |
| |
Module type | 10/100/1000BASE-T Fast Ethernet switching module |
| with IEEE802.3af PoE |
| |
Port duplex mode | Half or full duplex mode |
| |
Port speed | 10, 100, or 1000 Mbps |
| |
Number of ports | 24 |
| |
Connector type | RJ-45 (See Figure 2-1 on page 2-2.) |
| |
Cable type | UTP |
| |
Power over Ethernet | Up to 15.4 W per powered device on all 24 ports |
| (to a 312 W total on the Catalyst 4006) |
| |
Figure 1-35 WS-X4524-GB-RJ45V 24-Port IEEE-Compliant PoE 10/100/1000BASE-T Switching Module
113138
To provide PoE with the 24-port PoE 10/100BASE-TX switching module in a Catalyst 4006 switch, you must have a power entry module (PEM) and a power shelf installed. The Catalyst 4006 switch can provide 312 W per PoE module to powered devices. If the powered devices are using the maximum 15.4 W per port, there is only enough power for 18 powered devices. If the powered devices are using less than 15.4 W per port, more powered devices can be powered, up to the 312 Watt maximum. For more information about installing the PEM or the external power shelf, refer to the Catalyst 4000 Series Installation Guide, Catalyst 4500 Series Installation Guide, Installation and Configuration Note for the Catalyst 4500 Series AC Power Shelf, or the Catalyst 4500 Series Power Entry Module and External Power Shelf Installation Note.
| Catalyst 4500 Series Module Installation Guide |
1-38 | 78-13267-06 |