Cisco Systems 4000 specifications Modules” section on page

Chapter 1 Module Overview and Specifications

Supervisor Engines

The supervisor engines have the following features:

•Data path and control for all network interfaces

•Management functions:

–Interface monitoring

–Environmental status

–SNMP and console/Telnet interface

•Hot-swapping

Note Packets are not forwarded while the module is removed. A system reboot occurs when a supervisor engine is reinserted.

•The Supervisor Engine II-Plus TS provides 12 nonblocking 10/100/1000BASE-T(RJ-45) ports and 8 1000BASE-X (SFP) ports.

•The Supervisor Engine II-Plus 10GE and Supervisor Engine V-10GE provide

2 nonblocking 10GBASE uplink ports.

•The Supervisor Engine II-Plus 10GE and Supervisor Engine V-10GE provide

4 1000BASE-X (SFP) ports.

•The Supervisor Engine IV and V support the Catalyst 4500 series NetFlow Services Card (WS-F4531). NetFlow is integral to the Supervisor Engine V-10 GE.

To install a supervisor engine, follow the procedure in the “Installing the

Modules” section on page 3-2.

The supervisor engines used in Catalyst 4000 and Catalyst 4500 switches are shown in Figure 1-1to Figure 1-8.

	Catalyst 4500 Series Module Installation Guide
78-13267-06		1-3