Cisco Systems 4000 specifications WS-X4412-2GB-T, 1-33, Specification, Description

Chapter 1 Module Overview and Specifications

Gigabit Ethernet Switching Modules

WS-X4412-2GB-T

The WS-X4412-2GB-T 14-port Gigabit Ethernet switching module (see

Figure 1-30) has the following specifications:

Specification	Description
Module type	1000BASE-T plus 1000BASE-X Gigabit Ethernet
	switching module
Port duplex mode	Full duplex mode
Port speed	1000 Mbps
Number of ports	12 1000BASE-T ports
	2 optional 1000BASE-X1uplink ports
Connector type	RJ-45 for the 12 1000BASE-T ports (See Figure 2-1
	on page 2-2.)
	SC-type for the 2 1000BASE-X ports1 (See
	Figure 2-16 on page 2-18.)
Cable type	Category 5 UTP (1000BASE-T)
	MMF or SMF (1000BASE-X)

1.See the “Installing, Removing, and Maintaining GBICs” section on page 2-8for GBIC support information.

Figure 1-30 WS-X4412-2GB-T 14-Port Gigabit Ethernet Switching Module

WS-X4412-2GB-TX

1000BASE-TX GIGABIT ETHERNET SWITCHING MODULE STATUS

1	2	3	4	5
					6	7	8
								9	10	11
											12

17 18

29319

Some Gigabit Ethernet ports on the WS-X4412-2GB-T switching module are oversubscribed. For additional information on these ports, see the “Configuring Gigabit Ethernet Ports” section on page 3-9.

Note You must use Category 5 cables when connecting to the 1000BASE-T ports on this switching module.

	Catalyst 4500 Series Module Installation Guide
78-13267-06		1-33