Cisco Systems 4000 specifications Front-Panel Components

Chapter 1 Module Overview and Specifications

Supervisor Engines

Figure 1-9 Supervisor Engine V-10GE (WS-X4516-10GE)

CONSOLE port

STATUS LED

Ethernet management port

Compact
Flash	RESET
port	button
Switch load		10 GE uplink	Gigabit SFP
indicators		ports	ports

120474

Front-Panel Components

The following connectors, LEDs, and buttons are located on the front panel of the supervisor engine:

•The STATUS LED, which indicates the operating state of the module

•Two Gigabit uplink ports (WS-X4013, WS-X4013+, WS-X4014, and WS-X4515 supervisor engines only)

•Four SFP Gigabit uplinks ports and 2 10-Gigabit uplink ports on WS-X4013+10GE and WS-X4016-10GE.

•Eight unmarked switch load indicator LEDs, which provide an approximation of the current traffic across the backplane

•A console port (DB-25 for the WS-X4012; RJ-45 for the WS-X4013, WS-X4013+, WS-X4013+ TS, WS-X4013+10GE, WS-X4014, WS-X4515, WS-X4516, and WS-X4516-10GE supervisor engines)

•An Ethernet management port (RJ-45)

•A link status LED, which provides status for the management port (10BASE-T on the WS-X4012 and 10/100BASE-T on the WS-X4013, WS-X4013+, WS-X4013+ TS, WS-X4013+10GE, WS-X4014, WS-X4515, WS-X4516, and WS-X4516-10GE supervisor engines)

	Catalyst 4500 Series Module Installation Guide
1-8	78-13267-06