96
3. Enter the show diag post command to show any errors on individual components.
Example
Run Fan Tests
The following tests are available to locate and diagnose fan modules:
•LED
•Self-Test page96

Run a Self-Test on a Fan

1. Identify the number of the fan you want to diagnose, if you do not already know the number.
a. Enter the show fan command.
Example
TS270-1# show diag post
================================================================================
Post Status
================================================================================
fru-slot post-status post-error
--------------------------------------------------------------------------------
card(1) failed _FRU_LIM_CARDTYPE_ERR
card(3) failed _FRU_SEEPROM_PROGRAM_ERR
card(5) passed none
card(6) passed none
card(7) passed none
card(8) passed none
card(9) passed none
card(11) failed _FRU_POWER_CONTROLLER_CONFIG_ERR
card(12) passed none
card(13) passed none
card(15) passed none
card(16) passed none
card(17) passed none
fan(1) passed none
SFS-270> enable
SFS-270# show fan
=====================================================================
Fan Information
=====================================================================
fan oper-status speed(%)
---------------------------------------------------------------------
1 up 74
2 up 70
3 up 89
4 up 87