54
Upgrading a Topspin 270/Cisco SFS 7008 with Element Manager
The following procedure describes the upgrade procedure using the Element Manager GUI. This procedure also assumes you are upgrading all fabric controllers in the chassis.
1.Launch Element Manager for the server switch.
2.Delete any old .img files to make room for the new image.
a.Select Maintenance > File Management
b.Click on a .img file, if one exists and click the Delete button.
c.Repeat for all Server Switches you wish to upgrade.
3.Copy the new image to the Server Switch:
a.Select Maintenance > File Management
b.Click the Import button.
c.File Type = Image
d.Select Remote FTP Server or Local File to navigate to the file.
Figure 4-1: Copy the .img File to Server Switch
e.Click the Copy button and wait for the message that indicates the copy was successful.
f.Click Ok.
4.Install the new image.
