Cisco Systems 7008, 270 manual Run Power Supply Tests, Run a LED Test on the Power Supply

98

4.Use the show diag fru-errorcommand to display any errors that appear in the result-string.

Example

SFS-270#show diag fru-error

============================================================

Fru-Error

============================================================

fru-slot fru-error

------------------------------------------------------------

card(1)	none
card(2)	none
card(7)	none
card(8)	none
card(9)	none
card(10)	none
card(11)	none
card(12)	none
card(13)	none
card(14)	none
card(15)	none
card(17)	none
fan(1)	none
fan(2)	none
	5. Reboot the chassis when the self-test is complete.

Example

SFS-270# reload

System configuration is modified. Save? [yes(default) no filename] y Proceed with reload? [yes(default) no] y

Run Power Supply Tests

The following tests are available to locate and diagnose fan modules:

•LED page 98

•Self-Test page 99

Run a LED Test on the Power Supply

Use the LED test to blink the LED and identify a specific power supply.

Example

SFS-270> enable
SFS-270# config
SFS-270(config)#diag power-supply 1	test led
SFS-270(config-diag-power-supply-1)#
SFS-270(config-diag-power-supply-1)#	start
SFS-270(config-diag-power-supply-1)#	stop
SFS-270(config-diag-power-supply-1)#