4 | L E S 6 0 0 O P E R A T I N G I N S T R U C T I O N S |
Operating Instructions
Step 1 Power for Your LES 600 Receiver/Amplifier
1Check that:
•Both front panel microphone volume controls (MIC 1 VOLUME and MIC 2 VOLUME) are set to minimum (turned fully
•The Receiver/Amplifier is connected to a power source: Use the enclosed AC/DC power adapter to plug into a power cord or a standard wall electrical outlet, and connect the other end to the DC POWER IN jack on the back panel.
•The speakers are connected as instructed in the Installation Guide included in your packing box.
2Turn ON the MIC 1 VOLUME power/volume knob located
on the left side of the front panel of the Receiver/Amplifier.
| The red POWER light on the top left | |
Note Refer to the | should light up. (If your system has | |
Reference Guide on page | the optional additional wireless mod- | |
14 to identify the name and | ule installed, you may turn the Mic 2 | |
location of each component | Volume power/volume knob on as | |
of your system. | well. This knob is located on the right | |
Familiarizing yourself with | ||
side of the front panel and has its own | ||
these pages may be helpful | ||
POWER light on the top right that | ||
if you are unfamiliar with | ||
will light up.) | ||
electronic equipment. | ||
|
