LightSpeed Technologies LES 600 Series Power for Your Belt-Pack Transmitter & Microphone

L E S 6 0 0 O P E R A T I N G I N S T R U C T I O N S 5

Step 2 Power for Your Belt-Pack Transmitter & Microphone

1Ensure the Belt-pack Transmitter is turned OFF.

2Your Belt-pack Transmitter has its internal rechargeable batteries already installed. Connect one end of the Charging Cable to one of the TRANSMITTER CHARGING jacks on the back panel of the Receiver/ Amplifier. Connect the other end of the Charging Cable to the INPUT charging jack on the side of the BP-60 Belt-pack Transmitter as shown in the illustration.

Note The internal rechargeable batteries are not completely charged when shipped. They must be fully charged for 8 or more hours before regular classroom operation.

3The battery charging indicator LED (labeled CHARGING) lights green when the Transmitter is connected with a charging cable to the TRANSMITTER CHARGING jack on the back panel of the Receiver/Amplifier. When charging is complete (8-12 hours), the CHARGING indicator light will turn off.