Function setup

60
DRC : Off
QSound : On
Menu : English
Subtitle : English
Audio : English
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
Parental : Off
Password : Change
Parental control setting
Some discs are specifi ed as not suitable for children. Such
discs can be limited not to playback with the unit.
1) Press or to select “Parental”, then press
ENTER. “Enter Password” screen will appear.
2) Press “0000” using Number buttons (0–9).
(Please note, this is pre-setting password of this
unit). Then press ENTER. The parental level list
will appear.
•Level Off: The parental control setting does not
function.
•Level 8:
Virtually all DVD software can be
played back.
•Level 1: DVD software for adults cannot be
played back.
3) Press or to select from the level 1 to level 8.
The limitation will be more severe as the level
number is lower. Then press ENTER.
Note:
• The parental control level is equivalent to the following
USA movie ratings.
Level 1: G Level 5:
Level 2: Level 6: R
Level 3: PG Level 7: NC-17
Level 4: PG-13 Level 8:
The parental control levels for other countries/area
than U.S. are included for future use. Check the
appropriate parental control level when you buy a DVD
video disc equipped with the parental control feature
in the future.
•
Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specifi c rating
level information though its disc jacket says “adult.”
For those discs, the age restriction will not work.
• The password is required every time when you
change the parental level.
• If you input a wrong number, press EXIT/CANCEL.

Setting details (continued)

Note:
• If each setup (pages 58 ~ 60 ) has completed, the unit
can always work under the same condition (especially with
DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
QSet the new password
1) Press or to select “Password”, then press
ENTER. “Enter Current Password” screen will
appear.
2) Press Number buttons (0–9) to input the current
password (If the password has not been set yet
after you purchase this unit, it is “0000”).
3) Then press ENTER. “Enter New Password” screen
will appear. Press Number buttons (0–9) to input
the new password.
4) Press ENTER. Now your new password has been
set. Be sure to remember this number!
If you forget the password
1) Press EJECT to remove the disc.
2) While holding 7 down on the remote control and
then press STOP on the unit. “Password Clear”
appears on the screen. Now the password
has been returned to the initial value (“0000”).
Customizing the function settings (Continued)

Function setup

61
Enter the password with Number buttons (0–9).
Then press ENTER.
If the DVD disc has been designed to
temporarily cancel the Rating level, the screen
which follows the “Reading” screen will
change, depending on which disc is played.
If you select “YES” with the ENTER key,
password input screen will then appear.
• If “NO” is selected, press EJECT to remove
the disc.

Temporary cancel the rating level by DVD disc

Temporarycancel the rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating level
that you have set.
It is up to you to decide whether to cancel the rating level or not.
DVD
Load a DVD disc.
1
Playback will commence if the entered
password is correct.
2
4
3
Enter Password
To exit from the entry, press
RETURN.
0–9

RETURN

ENTER

EJECT

Note:
• This temporary cancellation of rating level will be kept until
the disc is ejected.
When the disc is ejected, the original rating level will be
set again automatically.

Others

SYMPTOMS POSSIBLE SOLUTIONS PAGE
POWER
TV/DVD does not operate.
• Make sure the connection of AC cord is secured.
• Try another AC outlet.
• Unplug unit, then plug it back in.
19
TV BROADCAST RECEPTION
Poor sound or No sound.
• Station or Cable TV may have problems, try another station.
• Check Volume adjustments or mute.
• Check for sources of possible interference.
25
25, 26
64
Poor picture or No picture.
• Station or Cable TV may have problems, try another station.
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
• Check Picture setting.
25
14, 15
64
35
Poor reception on some
channels.
• Station or Cable TV may have problems, try another station.
• Station signal is weak, reorient antenna to receive weaker station.
• Check for sources of possible interference.
25
14
64
Poor color or no color.
• Station or Cable TV may have problems, try another station.
• Make sure channels are set into memory.
• Check Picture setting.
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
25
22
35
14, 15
64
Picture wobbles or drifts.
• Station or Cable TV may have problems, try another station.
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Check antenna or Cable TV connections, reorient antenna.
25
22
-
14, 15
No CATV reception.
• Check all Cable TV connections.
• Set Air/Cable selection to the Cable position.
• Station or Cable TV system problems, try another station.
15
22
25
Horizontal or diagonal bars on
screen.
• Check antenna or Cable TV connections, reorient antenna.
• Check for sources of possible interference.
14, 15
64
No reception above channel 13. • Make sure Air/Cable selection is in the appropriate position.
• If antenna is used, check UHF antenna connections.
22
14
TV shuts off.
• Auto shut off feature worked.
• Sleep Timer is set.
• Power interrupted.
41
26
-
Closed - Caption is not
activated.
• TV station experiencing problems or program tuned is not closed
captioned. Try another channel.
• Check Cable TV connection or VHF/UHF antenna, reposition or
rotate antenna.
• Set “CC Setting” to “On” to turn on the closed caption decoder.
25
14, 15
33
Display is not shown in your
language. • Select proper language in the menu options. 21
Troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or
service outlet if problems persist.
Be sure all connections are properly made when using with other units.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV/DVD and the power is resupplied, the Power Return feature will
turn the TV/DVD on automatically. If the power is going to be off for a long time or you are going to be away from the
TV/DVD for a long time, unplug the power cord from the wall outlet to prevent the TV/DVD from turning on in your
absence.
62

Others

SYMPTOMS POSSIBLE SOLUTIONS PAGE
DVD
Playback doesn·t start.
• No disc is loaded.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
42
7
8
No picture. • TV/DVD selector is not set correctly. 42
No sound.
• Check the input selector of the amplifi er is set properly.
• The unit is in the special playback mode.
• Select the correct Audio Input/Output position on AV amplifi er.
-
44
18, 19
Picture is distorted during fast
reverse/forward playback. • The picture will be distorted occasionally. -
Stopping playback, search,
slowmotion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions. -
No on-screen display. • Set Display to On. 58
The unit or remote operation key
is not functioning.
• Turn off the unit and unplug the AC power cord for several minutes,
then replug it. -
Playback does not start when
the title is selected. • Check the Parental setup. 60
Audio soundtrack and/or subtitle
language is not changed when
you playback a DVD.
• Multilingual language is not recorded on the DVD disc. 50
No subtitle. • Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.50
Angle cannot be changed. • Multi-angles are not recorded on the DVD disc. 49
“” appears on the screen. • The function is prohibited with the unit or the disc. 44
REMOTE CONTROL
The remote control does not
function.
• Aim the remote control at the remote sensor.
• Operate within approx. 5 meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
13
63