40
TV operation

Using the aspect feature/

Adjusting the back lighting

When the Aspect feature is set to On and the TV receives a 480i signal, the
picture size is automatically selected (as described in the following table).
The Backlight feature adjusts the screen brightness for improved picture
clarity.
1Press MENU in the TV mode. The TV menu
screen will appear. Press ϳ or ϴ to select
“Setup” , then press ϶ or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select ENTER:Set
2Press ϳ or ϴ to select “Backlight”.
Video Label >>
Backlight
Auto Shut Off Off
Reset>>
16
Setup
Closed Caption >>
Language English
: Select : Adjust
On
Aspect
3Press ϵ or ϶ to adjust the setting.
Video Label >>
Backlight
Auto Shut Off Off
Reset>>
8
Setup
Closed Caption >>
Language English
: Select : Adjust
On
Aspect
4After your desired setting, press EXIT/CANCEL
to return to the normal screen.

Adjusting the back lightingUsing the aspect feature

/ / /
MENU
EXIT/CANCEL
ENTER
1Press MENU in the TV mode. The TV menu
screen will appear. Press ϳ or ϴ to select
“Setup” , then press ϶ or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select ENTER:Set
2Press ϳ or ϴ to select “Aspect”.
Press ϵ or ϶ to select “On” or “Off”.
Video Label >>
Backlight
Auto Shut Off Off
Reset>>
16
Setup
Closed Caption >>
Language English
: Select : Adjust
On
Aspect
3After your desired setting, press EXIT/CANCEL
to return to the normal screen.
Aspect ratio of signal
source
Automatic aspect size
(When Aspect is On)
4:3 Normal Natural
16:9 Full Full
4:3 Letter box Theater Wide2
Not defi ned User-set mode
41
TV operation
1Press MENU in the TV mode. The TV menu
screen will appear. Press ϳ or ϴ to select
“Setup” , then press ϶ or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select ENTER:Set
2Press ϳ or ϴ to select “Auto Shut Off”.
Press ϵ or ϶ to select “On” or “Off”.
Video Label >>
Backlight
Auto Shut Off Off
Reset>>
16
Setup
Closed Caption >>
Language English
: Select
On
Aspect
: Adjust
3After your desired setting, press EXIT/CANCEL
to return to the normal screen.

Resetting your settingsSetting the Auto Shut Off

Setting the Auto Shut Off/

Resetting your settings

If the Auto Shut Off feature is On, a station being viewed stops broadcasting
and the TV is not operated, the TV will automatically shut itself off after 15
minutes.
The Reset function returns your settings to the factory settings. / / /
MENU
EXIT/CANCEL
ENTER
1Press MENU in the TV mode. The TV menu
screen will appear. Press ϳ or ϴ to select
“Setup” , then press ϶ or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select ENTER:Set
2Press ϳ or ϴ to select “Reset”.
Video Label >>
Backlight
Auto Shut Off Off
Reset>>
16
Setup
Closed Caption >>
Language English
: Select ENTER:Set
On
Aspect
3Press ϶ or ENTER to return your settings to
the factory settings.
4“Reset” will appear on the screen approx. 3
seconds, then it returns to the normal
Note:
The Reset function returns your adjustments to the
following factory settings:
•
Picture Setting
Brightness ......center (25)
Contrast ............max (50)
Sharpness......center (25)
Color ..............center (25)
Tint ...................center (0)
Color Temperature ...Cool
Picture Preference ....Sports
Film Mode .......................On
Bass...................center (15)
Treble ................center (15)
Balance................center (0)
42
Basic playback
Press STOP to end playback.
QResuming facility
• The unit records the stopped
point, depending on the disc.
“” appears on the screen.
PressPLAY to resume playback
(from the scene point).
• If you press STOP again
(“Q” appears on the TV screen.),
the unit will clear the stopped
point.
On the TV screen, “ ” changes to “Reading” and
then playback commences.
DVD
VCD
CD
Preparations:
• When connecting to other equipment, turn the power off.
1Press POWER on the unit or on the remote con-
trol to turn on the unit.
• POWER indicator on the front of the unit changes
blue. It may take approx. 10 seconds for a picture to
appear on screen.
• Every time you press POWER, the TV/DVD starts
from TV mode.
• When using an amplifi er, switch on the amplifi er.
4
2Press TV/DVD on the remote control to select DVD
mode.
The DVD startup screen will appear on the TV screen.
3Load a disc in the disc slot.

Basic playback

• Load the disc in the disc slot with the label side fac-
ing forward. (If the disc has a label.) Hold the disc
without touching either of its surfaces, align it with
the guides, and place it in position.
• If a disc is inserted during some modes other than
DVD mode, it may switch to DVD mode and then
playback may be begun automatically.
A menu screen will appear on the TV screen if the
disc has a menu feature.
Press / or / on the remote control to
select title, then press ENTER. Title is selected and
play commences.
6QTo start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the TV/DVD·s operation. In such
case, disconnect the AC cord, then connect it again.

Playing a disc

This section shows you the basics on how
to play a disc.
CAUTION
Keep your fi ngers well clear of the disc slot when
disc is loading or unloading. Neglecting to do so
may cause serious personal injury.
Press VOLUME + or – to adjust the volume.
5
Reading
ENTER
PLAY
STOP
TV/DVD
/ / /
POWER
VOL+/–
Volume : 25
EJECT
STOP VOLUME +/–
PLAY
POWER
Basic playback
43
To pause playback (still mode)
PressPAUSE during playback.
To resume normal playback,
pressPLAY.
• The sound is muted during still
mode.
To stop playback
PressSTOP.
To remove the disc
PressEJECT.
Remove the disc after the disc comes
out.
Note:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again 760 .
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up), “Reading” will appear on the display for a few
minutes and then “Incorrect Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC 51 .
• Some playback operations of DVDs may be intentionally fi xed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use the EJECT to unload and eject the disc.
• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on the remote control once the movie is completed.
• There may be a slight delay between the button is pressed and the function activates.
To obtain a higher quality picture
Occasionally, some picture noise may appear on the TV screen while playing a
DVD video disc because the high resolution pictures on these discs include a
lot of information. In such case, you may reduce the Sharpness with the Picture
Setting menu 35 .
About
DVD VCD CD
The
DVD VCD CD
icons on the heading bar show the playable discs for the
function described under that heading.
: You can use this function with DVD video discs.
VCD
: You can use this function with Video CDs.
CD
: You can use this function with Audio CDs and CD-R/RW CDs.
DVD
VCD
CD

Basic playback (continued)

PAUSE
STOP
PLAY
POWER
EJECT