Cisco Systems AS5400 manual IN-2

3-11

3-11

Index

E

E1 network specifications (table) 3-2

environment monitoring	6-6
environment status, checking 6-7
ESD wrist-strap, safety	1-3

F

Figures

2-Port or 4-Port T1 or E1 DFC LEDs 6-1

2-Port T1 or E1 DFC		3-1
4-Port T1 or E1	DFC	3-2
8-Port T1/E1 Interface Cable			A-3
8-Port T1 or E1	DFC	3-2
8-Port T1 or E1	DFC LEDs		6-2
Bantam Ports	6-9

Blank DFC Cover 2-5,3-6,4-5,5-5

Carrier Card With Two 8 PRI CT1/CE1 Cards 2-2

Connecting the 36-Pin Cable Connector to an 8-port T1

DFC A-9
CT3 Cable Assembly A-10
Install the Carrier Card in the Cisco AS5350		2-5
Install the Carrier Card in the Cisco AS5400		2-5
Install the DFC in the Cisco AS5400 5-7
Install the T1 or E1 DFC in the Cisco AS5350		3-9
Install the T1 or E1 DFC in the Cisco AS5400		3-10
Install the T3 DFC in the Cisco AS5350	4-6
Install the T3 DFC in the Cisco AS5400	4-6
Install the Universal Port DFC in the Cisco AS5350			5-7
J-45 to DB-15 Interface Cable A-2
Loosen the Captive Screws on the Cisco AS5350			2-3,
3-5,4-4,5-4
Loosen the Captive Screws on the Cisco AS5400			2-4,
3-5,4-4,5-4
Placing the Molded RJ-45 End of the Cable on the
Bracket A-5
Remove the DFC from the Cisco AS5350	3-6,4-5,5-4
Remove the DFC from the Cisco AS5400	3-6,4-5,5-5
Removing the Carrier Card from the Cisco AS5350			2-4

Removing the Carrier Card from the Cisco AS5400 2-4

RJ-45 to Bare Wire Interface Cable A-2

RJ-45 to BNC Interface Cable for 75-Ohm, Unbalanced Connections A-2

RJ-45 to RJ-45 Interface Cable A-2

RJ-45 to Twinax Interface Cable for 120-Ohm, Balanced Connections A-2

Routing Cables with Molded RJ-45 Ends of Cables Flush with Bracket Edges A-7

Routing Cables with Molded RJ-45 Ends of Cables Next

to Each Other	A-6
Securing the Cable Bracket to the Rack A-8
Slot Numbering on the Cisco AS5350 Chassis		3-3,4-2,
5-2,6-6
Slot Numbering on the Cisco AS5400 Chassis		3-4,4-3,
5-3,6-6
T3 DFC LEDs 6-2
T3 Dial Feature Card	4-1
Tighten the Captive Screws on the Cisco AS5350			2-6,
3-10,4-6,5-8
Tighten the Captive Screws on the Cisco AS5400			2-6,
3-10,4-7,5-8
Universal Port DFC	5-1

Universal Port DFC LEDs 6-2

G

ground connection first warning 1-2ground connections, safety 1-2

H

hardware features, new xiii

help, getting xii, 2-7,3-14,4-7,5-9,6-10

I

input impedance, configuring input impedance, verifying installation instructions warning 1-2installing a carrier card 2-5

Cisco AS5350 and Cisco AS5400 Universal Gateway Card Installation Guide

IN-2 78-13311-01